JACKSON Automatic 3D Laser Aluminum Tube/Pipe Cutting Machine Tutorial
Welcome to this tutorial on how to use the JACKSON Automatic 3D Laser Aluminum Tube/Pipe Cutting Machine. This machine is designed for precision cutting of aluminum tubes and pipes using a laser cutting technology. Below are the step-by-step instructions on how to operate this machine.
Step 1: Power On the Machine
Locate the power button on the machine and turn it on. Wait for the machine to boot up and initialize before proceeding to the next step.
Step 2: Load the Aluminum Tube/Pipe
Open the machine’s loading bay and place the aluminum tube or pipe that you want to cut inside. Make sure the tube is securely placed and aligned properly.
Step 3: Set the Cutting Parameters
Use the control panel of the machine to set the cutting parameters such as the cutting speed, laser intensity, and cutting path. Make sure to input the correct parameters based on the type of aluminum and thickness of the tube.
Step 4: Start the Cutting Process
Press the start button on the control panel to initiate the cutting process. The machine will start cutting the aluminum tube according to the parameters you have set. Make sure to monitor the cutting process to ensure accuracy.
Step 5: Remove the Cut Tube/Pipe
Once the cutting process is complete, carefully remove the cut aluminum tube or pipe from the machine. Be cautious as the cut edges may be sharp.
Step 6: Power Off the Machine
After you have finished cutting the aluminum tube, power off the machine by pressing the power button. Make sure to clean the machine and remove any debris before shutting it down.
Step 7: Maintenance
Regularly clean and maintain the machine to ensure optimal performance. Check the laser cutting head and replace any worn-out parts as needed.
Congratulations! You have successfully used the JACKSON Automatic 3D Laser Aluminum Tube/Pipe Cutting Machine. With this machine, you can achieve precise and accurate cuts on aluminum tubes and pipes. Thank you for reading this tutorial.
