हर घर की जरूरत || How To Make Water Bottle Pump || it works 100% || Home Made Water Dispenser Pump

Water is essential for life and having a reliable way to dispense water in your home is important. In this article, we will show you how to make your own water bottle pump that works 100% and can be used as a homemade water dispenser pump. This simple DIY project will save you time and money in the long run.

Materials Needed:

• Empty plastic water bottle
• Rubber tube
• Scissors
• Small handheld pump
• Hot glue gun

Instructions:

1. Start by cutting the bottom of the plastic water bottle using scissors. Make sure the cut is clean and straight.
2. Insert the rubber tube through the hole in the bottom of the water bottle. The tube should be long enough to reach the bottom of the bottle.
3. Secure the rubber tube in place using a hot glue gun to prevent any leaks.
4. Attach the small handheld pump to the other end of the rubber tube. This pump will be used to dispense the water from the bottle.
5. Fill the water bottle with clean water and place it upside down on a flat surface. Pump the handheld pump to dispense water from the bottle.
6. Your homemade water dispenser pump is now ready to use!

This DIY project is a cost-effective way to create a water bottle pump that works 100% and can be used as a homemade water dispenser pump in your home. It is easy to make and requires minimal materials. Say goodbye to heavy water jugs and invest in a homemade water dispenser pump today!