Upgrade your Lenovo Ideapad G40 45 with an SSD for faster boot times and improved performance

Posted by

If you are seeing a “No Bootable Device” error message on your Lenovo Ideapad G40-45, it typically means that your laptop is unable to find a valid operating system to boot from. This can happen for a variety of reasons, such as a faulty hard drive or operating system corruption.

In this tutorial, we will guide you through the process of upgrading your hard drive to an SSD in order to potentially resolve the “No Bootable Device” issue.

Step 1: Prepare Your Tools
Before you begin, make sure you have the following tools handy:
– A new SSD (Solid State Drive)
– A small screwdriver
– An external hard drive or USB flash drive (optional, for backup purposes)
– A bootable USB drive containing the Windows operating system
– Internet access to download necessary drivers and software

Step 2: Backup Your Data (Optional)
If you have any important files on your current hard drive, it is recommended to back them up before proceeding with the upgrade. You can do this by transferring your files to an external hard drive or USB flash drive.

Step 3: Turn Off Your Laptop
Make sure your laptop is powered off before you begin the upgrade process. Disconnect any peripherals and the power cord to prevent any accidents.

Step 4: Remove the Old Hard Drive
Locate the hard drive compartment on your Lenovo Ideapad G40-45. Use a small screwdriver to remove the screws securing the hard drive in place. Carefully remove the old hard drive from its slot and disconnect any cables attached to it.

Step 5: Install the SSD
Insert the new SSD into the empty slot where the old hard drive was located. Secure the SSD in place with the screws that were removed earlier. Make sure all cables are properly connected to the SSD.

Step 6: Reinstall the Operating System
Insert the bootable USB drive containing the Windows operating system into a USB port on your laptop. Power on your laptop and press the appropriate key (usually F2 or F12) to access the boot menu. Select the USB drive as the boot device and follow the on-screen instructions to install the operating system on the new SSD.

Step 7: Install Drivers and Software
Once the operating system is installed, download and install any necessary drivers and software from the Lenovo website to ensure optimal performance of your laptop.

Step 8: Restore Your Data (Optional)
If you backed up your data in Step 2, transfer your files back to your laptop from the external storage device.

Step 9: Test Your Laptop
Restart your laptop to ensure that it now boots up properly from the new SSD. If you no longer see the “No Bootable Device” error message, congratulations! You have successfully upgraded your hard drive to an SSD.

In conclusion, upgrading your Lenovo Ideapad G40-45’s hard drive to an SSD can potentially resolve the “No Bootable Device” issue and improve overall performance. Follow the steps outlined in this tutorial carefully to ensure a successful upgrade process.